Showing posts with label ccna icnd2. Show all posts
Showing posts with label ccna icnd2. Show all posts

Friday, August 02, 2019

CCNA 200-125 has been replaced with CCNA 200-301, which will go live on February 2020

Cisco will release a new, consolidated CCNA exam on 24 February 2020. it means CCNA 200-125 certification exam series and objectives are going to change on the last week of February 2020. If you have started working towards CCNA Routing and Switching certification, keep going. You have until 23 February 2020, to complete your current CCNA.
  • If you complete any current CCNA certification before February 24, you’ll receive the new CCNA certification and a training badge in the corresponding technology area.
  • If you already earned your CCENT (Cisco® Certified Entry Network Technician)certification and would like to earn CCNA, you have until February 23 to complete your CCNA certification in the current program.  you will need to take the new exam to complete CCNA certification.
  • As of February 24, you should have to take a single exam 200-301 to earn the new CCNA Certification. There are no prerequisites for the 200-301. Previously, Candidates has the two options either a single CCNA Routing and Switching (200-125) or CCENT(100-105) and CCNA-ICND2(200-105) to get certified in CCNA. The new exam scheduled to go live on 24 Feb 2020.
The New CCNA Cert will validate a broad range of knowledge and skills and the exam covers networking and security fundamentals, as well as automation and programmability. If you would like to earn any current Cisco® CCNA™, CCENT™ and ICND2 certifications you can just take the advantages of the examguides and Practice tests which is providing real exam questions with detailed answers in real exam surroundings. Check it out.

CCNA: http://www.certexams.com/cisco/ccna/exam-details.htm
CCENT: http://www.certexams.com/cisco/ccent/exam-details.htm
CCNA-ICND2: http://www.certexams.com/cisco/ccna-icnd2/exam-details.htm

Friday, October 21, 2016

SimulationExams.com Releases Cisco(R) CCNA ICND2 200-105 Practice Tests

SimulationExams.com released an update to Cisco CCNA ICND2 practice tests recently. The practice tests conform to the latest exam objectives as given below:

1.0 LAN Switching Technologies

26%


1.1 Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches
  • 1.1.a Access ports (data and voice)
  • 1.1.b Default VLAN
1.2 Configure, verify, and troubleshoot interswitch connectivity
  • 1.2.a Add and remove VLANs on a trunk
  • 1.2.b DTP and VTP (v1&v2)
1.3 Configure, verify, and troubleshoot STP protocols
  • 1.3.a STP mode (PVST+ and RPVST+)
  • 1.3.b STP root bridge selection
1.4 Configure, verify, and troubleshoot STP-related optional features
  • 1.4.a PortFast
  • 1.4.b BPDU guard
1.5 Configure, verify, and troubleshoot (Layer 2/Layer 3) EtherChannel
  • 1.5.a Static
  • 1.5.b PAGP
  • 1.5.c LACP
1.6 Describe the benefits of switch stacking and chassis aggregation
1.7 Describe common access layer threat mitigation techniques
  • 1.7.a 802.1x
  • 1.7.b DHCP snooping
  • 1.7.c Nondefault native VLAN

2.0 Routing Technologies

29%


2.1 Configure, verify, and troubleshoot Inter-VLAN routing
  • 2.1.a Router on a stick
  • 2.1.b SVI
2.2 Compare and contrast distance vector and link-state routing protocols
2.3 Compare and contrast interior and exterior routing protocols
2.4 Configure, verify, and troubleshoot single area and multiarea OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
2.5 Configure, verify, and troubleshoot single area and multiarea OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
2.6 Configure, verify, and troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)
2.7 Configure, verify, and troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)

3.0 WAN Technologies

16%


3.1 Configure and verify PPP and MLPPP on WAN interfaces using local authentication
3.2 Configure, verify, and troubleshoot PPPoE client-side interfaces using local authentication
3.3 Configure, verify, and troubleshoot GRE tunnel connectivity
3.4 Describe WAN topology options
  • 3.4.a Point-to-point
  • 3.4.b Hub and spoke
  • 3.4.c Full mesh
  • 3.4.d Single vs dual-homed
3.5 Describe WAN access connectivity options
  • 3.5.a MPLS
  • 3.5.b MetroEthernet
  • 3.5.c Broadband PPPoE
  • 3.5.d Internet VPN (DMVPN, site-to-site VPN, client VPN)
3.6 Configure and verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)

4.0 Infrastructure Services

14%


4.1 Configure, verify, and troubleshoot basic HSRP
  • 4.1.a Priority
  • 4.1.b Preemption
  • 4.1.c Version
4.2 Describe the effects of cloud resources on enterprise network architecture
  • 4.2.a Traffic path to internal and external cloud services
  • 4.2.b Virtual services
  • 4.2.c Basic virtual network infrastructure
4.3 Describe basic QoS concepts
  • 4.3.a Marking
  • 4.3.b Device trust
  • 4.3.c Prioritization
    • 4.3.c. [i] Voice
    • 4.3.c. [ii] Video
    • 4.3.c. [iii] Data
  • 4.3.d Shaping
  • 4.3.e Policing
  • 4.3.f Congestion management
4.4 Configure, verify, and troubleshoot IPv4 and IPv6 access list for traffic filtering
  • 4.4.a Standard
  • 4.4.b Extended
  • 4.4.c Named
4.5 Verify ACLs using the APIC-EM Path Trace ACL analysis tool

5.0 Infrastructure Maintenance

15%


5.1 Configure and verify device-monitoring protocols
  • 5.1.a SNMPv2
  • 5.1.b SNMPv3
5.2 Troubleshoot network connectivity issues using ICMP echo-based IP SLA
5.3 Use local SPAN to troubleshoot and resolve problems
5.4 Describe device management using AAA with TACACS+ and RADIUS
5.5 Describe network programmability in enterprise network architecture
  • 5.5.a Function of a controller
  • 5.5.b Separation of control plane and data plane
  • 5.5.c Northbound and southbound APIs
5.6 Troubleshoot basic Layer 3 end-to-end connectivity issues
Note: The exam topics may change from time to time, and please visit official web page for the latest information.

The practice tests may be downloaded here:
http://www.simulationexams.com/downloads/cisco-tests/ccna-icnd/ccna-icnd2-practicetest-download.htm

The question types include multiple choice, drag-n-drop, simlet, and testlets.The demo version of the software is free and contains up to 30 questions. The full version will have 300+ questions with flash card explanations.