Friday, October 21, 2016

SimulationExams.com Releases Cisco(R) CCNA ICND2 200-105 Practice Tests

SimulationExams.com released an update to Cisco CCNA ICND2 practice tests recently. The practice tests conform to the latest exam objectives as given below:

1.0 LAN Switching Technologies

26%


1.1 Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches
  • 1.1.a Access ports (data and voice)
  • 1.1.b Default VLAN
1.2 Configure, verify, and troubleshoot interswitch connectivity
  • 1.2.a Add and remove VLANs on a trunk
  • 1.2.b DTP and VTP (v1&v2)
1.3 Configure, verify, and troubleshoot STP protocols
  • 1.3.a STP mode (PVST+ and RPVST+)
  • 1.3.b STP root bridge selection
1.4 Configure, verify, and troubleshoot STP-related optional features
  • 1.4.a PortFast
  • 1.4.b BPDU guard
1.5 Configure, verify, and troubleshoot (Layer 2/Layer 3) EtherChannel
  • 1.5.a Static
  • 1.5.b PAGP
  • 1.5.c LACP
1.6 Describe the benefits of switch stacking and chassis aggregation
1.7 Describe common access layer threat mitigation techniques
  • 1.7.a 802.1x
  • 1.7.b DHCP snooping
  • 1.7.c Nondefault native VLAN

2.0 Routing Technologies

29%


2.1 Configure, verify, and troubleshoot Inter-VLAN routing
  • 2.1.a Router on a stick
  • 2.1.b SVI
2.2 Compare and contrast distance vector and link-state routing protocols
2.3 Compare and contrast interior and exterior routing protocols
2.4 Configure, verify, and troubleshoot single area and multiarea OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
2.5 Configure, verify, and troubleshoot single area and multiarea OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
2.6 Configure, verify, and troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)
2.7 Configure, verify, and troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)

3.0 WAN Technologies

16%


3.1 Configure and verify PPP and MLPPP on WAN interfaces using local authentication
3.2 Configure, verify, and troubleshoot PPPoE client-side interfaces using local authentication
3.3 Configure, verify, and troubleshoot GRE tunnel connectivity
3.4 Describe WAN topology options
  • 3.4.a Point-to-point
  • 3.4.b Hub and spoke
  • 3.4.c Full mesh
  • 3.4.d Single vs dual-homed
3.5 Describe WAN access connectivity options
  • 3.5.a MPLS
  • 3.5.b MetroEthernet
  • 3.5.c Broadband PPPoE
  • 3.5.d Internet VPN (DMVPN, site-to-site VPN, client VPN)
3.6 Configure and verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)

4.0 Infrastructure Services

14%


4.1 Configure, verify, and troubleshoot basic HSRP
  • 4.1.a Priority
  • 4.1.b Preemption
  • 4.1.c Version
4.2 Describe the effects of cloud resources on enterprise network architecture
  • 4.2.a Traffic path to internal and external cloud services
  • 4.2.b Virtual services
  • 4.2.c Basic virtual network infrastructure
4.3 Describe basic QoS concepts
  • 4.3.a Marking
  • 4.3.b Device trust
  • 4.3.c Prioritization
    • 4.3.c. [i] Voice
    • 4.3.c. [ii] Video
    • 4.3.c. [iii] Data
  • 4.3.d Shaping
  • 4.3.e Policing
  • 4.3.f Congestion management
4.4 Configure, verify, and troubleshoot IPv4 and IPv6 access list for traffic filtering
  • 4.4.a Standard
  • 4.4.b Extended
  • 4.4.c Named
4.5 Verify ACLs using the APIC-EM Path Trace ACL analysis tool

5.0 Infrastructure Maintenance

15%


5.1 Configure and verify device-monitoring protocols
  • 5.1.a SNMPv2
  • 5.1.b SNMPv3
5.2 Troubleshoot network connectivity issues using ICMP echo-based IP SLA
5.3 Use local SPAN to troubleshoot and resolve problems
5.4 Describe device management using AAA with TACACS+ and RADIUS
5.5 Describe network programmability in enterprise network architecture
  • 5.5.a Function of a controller
  • 5.5.b Separation of control plane and data plane
  • 5.5.c Northbound and southbound APIs
5.6 Troubleshoot basic Layer 3 end-to-end connectivity issues
Note: The exam topics may change from time to time, and please visit official web page for the latest information.

The practice tests may be downloaded here:
http://www.simulationexams.com/downloads/cisco-tests/ccna-icnd/ccna-icnd2-practicetest-download.htm

The question types include multiple choice, drag-n-drop, simlet, and testlets.The demo version of the software is free and contains up to 30 questions. The full version will have 300+ questions with flash card explanations.
 

Saturday, October 15, 2016

CCENT 100-105 Practice Tests Released

SimulationExams.com recently released CCENT (short for Cisco Certified Entry Network Technician) practice tests. The practice tests consist of several hundreds of most relevant questions with answers. The exams conform to the latest exam objectives 100-105.

You may download the free trial version of the software here:
http://www.simulationexams.com/exam-details/cisco-ccent.htm

The new objectives associated with CCENT are given below:
1.0 Network Fundamentals 20%
  
2.0 LAN Switching Fundamentals 26%
  
3.0 Routing Fundamentals 25%
  
4.0 Infrastructure Services 15%
  
5.0 Infrastructure Maintenance 14%

Detailed exam objectives:

1.0 Network Fundamentals   20%

1.1 Compare and contrast OSI and TCP/IP models

1.2 Compare and contrast TCP and UDP protocols

1.3 Describe the impact of infrastructure components in an enterprise network

    1.3.a Firewalls
    1.3.b Access points
    1.3.c Wireless controllers

1.4 Compare and contrast collapsed core and three-tier architectures

1.5 Compare and contrast network topologies

    1.5.a Star
    1.5.b Mesh
    1.5.c Hybrid

1.6 Select the appropriate cabling type based on implementation requirements

1.7 Apply troubleshooting methodologies to resolve problems

    1.7.a Perform fault isolation and document
    1.7.b Resolve or escalate
    1.7.c Verify and monitor resolution

1.8 Configure, verify, and troubleshoot IPv4 addressing and subnetting

1.9 Compare and contrast IPv4 address types

    1.9.a Unicast
    1.9.b Broadcast
    1.9.c Multicast

1.10 Describe the need for private IPv4 addressing
1.11 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment
1.12 Configure, verify, and troubleshoot IPv6 addressing
1.13 Configure and verify IPv6 Stateless Address Auto Configuration
1.14 Compare and contrast IPv6 address types

    1.14.a Global unicast
    1.14.b Unique local
    1.14.c Link local
    1.14.d Multicast
    1.14.e Modified EUI 64
    1.14.f Autoconfiguration
    1.14.g Anycast

2.0 LAN Switching Fundamentals 26%


2.1 Describe and verify switching concepts

    2.1.a MAC learning and aging
    2.1.b Frame switching
    2.1.c Frame flooding
    2.1.d MAC address table

2.2 Interpret Ethernet frame format

2.3 Troubleshoot interface and cable issues (collisions, errors, duplex, speed)

2.4 Configure, verify, and troubleshoot VLANs (normal range) spanning multiple switches

    2.4.a Access ports (data and voice)
    2.4.b Default VLAN

2.5 Configure, verify, and troubleshoot interswitch connectivity

    2.5.a Trunk ports
    2.5.b 802.1Q
    2.5.c Native VLAN
    2.6 Configure and verify Layer 2 protocols
    2.6.a Cisco Discovery Protocol
    2.6.b LLDP

2.7 Configure, verify, and troubleshoot port security

    2.7.a Static
    2.7.b Dynamic
    2.7.c Sticky
    2.7.d Max MAC addresses
    2.7.e Violation actions
    2.7.f Err-disable recovery

3.0 Routing Fundamentals  25%

3.1 Describe the routing concepts

    3.1.a Packet handling along the path through a network
    3.1.b Forwarding decision based on route lookup
    3.1.c Frame rewrite

3.2 Interpret the components of routing table

    3.2.a Prefix
    3.2.b Network mask
    3.2.c Next hop
    3.2.d Routing protocol code
    3.2.e Administrative distance
    3.2.f Metric
    3.2.g Gateway of last resort

3.3 Describe how a routing table is populated by different routing information sources

    3.3.a Admin distance

3.4 Configure, verify, and troubleshoot inter-VLAN routing

3.4.a Router on a stick

3.5 Compare and contrast static routing and dynamic routing

3.6 Configure, verify, and troubleshoot IPv4 and IPv6 static routing

    3.6.a Default route
    3.6.b Network route
    3.6.c Host route
    3.6.d Floating static

3.7 Configure, verify, and troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution)

4.0 Infrastructure Services  15%
4.1 Describe DNS lookup operation

4.2 Troubleshoot client connectivity issues involving DNS

4.3 Configure and verify DHCP on a router (excluding static reservations)

    4.3.a Server
    4.3.b Relay
    4.3.c Client

4.3.d TFTP, DNS, and gateway options

4.4 Troubleshoot client- and router-based DHCP connectivity issues

4.5 Configure and verify NTP operating in client/server mode

4.6 Configure, verify, and troubleshoot IPv4 standard numbered and named access list for routed interfaces

4.7 Configure, verify, and troubleshoot inside source NAT

    4.7.a Static
    4.7.b Pool
    4.7.c PAT

5.0 Infrastructure Maintenance 14%
5.1 Configure and verify device-monitoring using syslog

5.2 Configure and verify device management

    5.2.a Backup and restore device configuration
    5.2.b Using Cisco Discovery Protocol and LLDP for device discovery
    5.2.c Licensing
    5.2.d Logging
    5.2.e Timezone
    5.2.f Loopback

5.3 Configure and verify initial device configuration

5.4 Configure, verify, and troubleshoot basic device hardening

    5.4.a Local authentication
    5.4.b Secure password
    5.4.c Access to device
        5.4.c. Source address
        5.4.c. [ii] Telnet/SSH
    5.4.d Login banner

5.5 Perform device maintenance

    5.5.a Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)
    5.5.b Password recovery and configuration register
    5.5.c File system management

5.6 Use Cisco IOS tools to troubleshoot and resolve problems

    5.6.a Ping and traceroute with extended option
    5.6.b Terminal monitor
    5.6.c Log events


Note: the exam objectives may change from time to time, and it is advised to check with the official Cisco(R) website for the latest information..

OSPF (single area) and other OSPF topics were moved into ICND2 since RIP is used to introduce CCENT candidates to IP routing protocols.

    Dual Stack was removed since there are many different IPv4 to IPv6 transition technologies being used.

    Cisco Express Forwarding (CEF) has been removed.

Key Topics Added:

    High level knowledge of the impact and interactions of infrastructure components in an Enterprise network, specifically:

        Firewalls
        Access Points
        Wireless Controllers

Thursday, October 13, 2016

CCNA 200-125 Released

SimulationExams.com released the  newest CCNA 200-125 practice tests. Check them out here:
http://www.simulationexams.com/exam-details/ccna.htm
There are several new topics added to the new CCNA. The constituent exams are
CCENT: 100-105
ICND2: 200-105
Download the practice tests here:
http://www.simulationexams.com/downloads/cisco-tests/ccna/ccna-practicetest-download.htm